As spray CIP technology was applied in the pharmaceutical industry, nearly all vessels were found to be of a vertical cylindrical design, with an ASME dish tank head and bottom.
The first spray CIP of pharmaceutical tanks by ESC was accomplished with multiple sprays of “standard” design; i.e., 20, 30, 0r 40 Gpm, selected and located to distribute 2.5 – 3.0 Gpm/Ft circumference on the top head only, thus enjoying the run-down or “sheeting” action of all of the solutions on the sidewalls and bottom.
The first spray CIP of pharmaceutical tanks by ESC was accomplished with multiple sprays of “standard” design; i.e., 20, 30, 0r 40 Gpm, selected and located to distribute 2.5 – 3.0 Gpm/Ft circumference on the top head only, thus enjoying the run-down or “sheeting” action of all of the solutions on the sidewalls and bottom.
For more information, visit Electrol Specialties Company
Read original source: http://www.esc4cip.com/custom-spray-devices/fbsd/
Thank you for sharing the video. The data that you provided in the video is informative and effective.
ReplyDelete