Electrol Specialties a Process Design & Consulting Company

Electrol Specialties Company is a 50 plus year old employee possessed company.  ESC is identified innovator in clean-in-place (CIP) technological innovation, and has been operating in this area for over 40 years.As a complete assistance source to the biopharm industry.

 

ESC provides process consulting services as well and solutions to guarantee the consumer maximum outcome by appropriate usage of procedure and CIP.  This capability was openly identified when ESC was known as as a main venture associate by two of the 2007 ISPE Facility of the Year prize champions.

What are Custom Pump Carts

We fabricate and designs custom pump carts to use them in the pharmaceutical, food, and specialty chemical industries. Pump carts are built to fulfill the requirements like materials compatibility, surface finish, hygienic design standard, and area electrical classification. It can be very simple just like on/off options or very sophisticated like PLC controller & HMI screens

We are capable to perform hydraulic calculations to ensure correct pump selection given the solution being pumped and temperature range of operation.

CIP Mixing Systems

We are identified by major dairy, food processing and pharmaceutical industries as a supplier of good stainless steel equipments. 

Electrol Specialties Company specializes in mixing systems and food & beverage equipment it is also known for quality, applied technology and on-time deliveries. We supply Single Tank Single Use (STSU) CIP systems to the industries. 
Read original source : http://www.esc4cip.com/food-beverage-equipment/

Single-Tank Single-Use CIP Skids, System

Electrol Specialties Company's Single-Tank Single-Use CIP Systems are developed to provide completely computerized process for cleaning with an overall lowest application need, and in the absolute minimum utility requirement.  A common CIP skid has a water suoply/wash remedy recirculation container, CIP pump, heat exchanger, circulation management valves, instrumentation... all set up in a  impact that can be as compact as 3 ft (1 m) wide by 6 ft (2.0 m) long.

VIEW TO GET INFORMATION ON SINGLE-TANK SINGLE USE CIP SYSTEM FEATURES

Spray Ball Design: Electrol Specialties Company

As spray CIP technology was applied in the pharmaceutical industry, nearly all vessels were found to be of a vertical cylindrical design, with an ASME dish tank head and bottom.
 The first spray CIP of pharmaceutical tanks by ESC was accomplished with multiple sprays of “standard” design; i.e., 20, 30, 0r 40 Gpm, selected and located to distribute 2.5 – 3.0 Gpm/Ft circumference on the top head only, thus enjoying the run-down or “sheeting” action of all of the solutions on the sidewalls and bottom.

 

For more information, visit Electrol Specialties Company

 Read original source: http://www.esc4cip.com/custom-spray-devices/fbsd/

ESC exhibiting in the upcoming Bay Area Chapter, ISPE 2014

Electrol Specialties Companies is exhibiting on 27th march, 2014 at Booth 4 in the upcoming Bay Area Chapter, International Society for Pharmaceutical Engineering (ISPE) at South Francisco Conference Center. The ISPE Product Show draws attendees active in the pharma industry from around the Bay Area.
For registration information, visit: http://www.ispe.org/sanfrancisco

ESC will be represented by Frank Bazo, its President and John Franks, its Vice President at the event. Electrol Specialties Company manufactures and designs HTST systems, transfer panels, spray devices, batching systems and much more. ESC has served the dairy, chemical and pharmaceutical industries for more than 60 years.

Get More Information About Cleaning Equipments- Process Skid

In the world of cleaning technology Electrol Specialties Company has a experience of 60 years. We are the recognized leader in process skid & hygienic process. The proper application of cleaning requires an understanding of the process requirements, sanitary design, selecting and integrating equipment and applying methods of operation to create a highly repeatable and hygienic process system. Our extensive experience in all aspects of this technology make us uniquely qualified as a fixed process skid manufacturer. Equipments for CIP includes:
 Mixing Skids and Blending Modules (batch and continuous)
 Product Formulation and Batching Systems
 Caustic Dilution Systems
 Filtration Skids
 Bio Kill Systems (thermal and chemical)

 For more details about our services visit us or ring us @ (815) 389-2291.